desdalc5lp document number: ds36761 rev. 2 - 2 1 of 6 www.diodes.com may 2014 ? diodes incorporated desdalc5lp advance information advanced information 1 channel bidirectional tvs diode product summary v br ( min ) i pp ( max ) i r ( max ) 5.8v and 11v 9a 25na description this new generation tvs is designed to protect sensitive electronics from the damage due to esd. the combination of small size and high esd surge capability makes it ideal for use in portable applications such as cellular phones, digital cameras, and mp3 players. applications ? cellular handsets ? portable electronics ? computers and peripheral features ? low profile package (0.53mm max) and ultra-small pcb footprint area (1.08 * 0.68mm max) suitable for compact portable electronics ? provides esd protection per iec 61000-4-2 standard: air 30kv, contact 30kv ? 1 channel of esd protection ? low channel input capacitance ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) mechanical data ? case: x1-dfn1006-2 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: nipdau over copper leadframe. solderable per mil- std-202, method 208 ? weight: 0.001 grams (approximate) ordering information (note 4) product compliance marking reel size (inches) tape width (mm) quantity per reel DESDALC5LP-7B standard q3 7 8 10,000/tape & reel notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our websit e at http://www.diodes.com /products/packages.html. marking information device schematic bottom view x1-dfn1006-2 q3 = product type marking code line denotes pin 1 q3 e4
desdalc5lp document number: ds36761 rev. 2 - 2 2 of 6 www.diodes.com may 2014 ? diodes incorporated desdalc5lp advance information advanced information maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit conditions peak pulse power dissipation p pp 150 w 8/20s peak pulse current i pp 9 a 8/20s esd protection ? contact discharge v esd_contact 30 kv iec 61000-4-2 standard esd protection ? air discharge v esd_air 30 kv iec 61000-4-2 standard thermal characteristics characteristic symbol value unit package power dissipation (note 5) p d 250 mw thermal resistance, junction to ambient (note 5) r ja 500 c/w operating and storage temperature range t j , t stg -65 to +150 c electrical characteristics (@t a = +25c unless otherwise specified) characteristic symbol min typ max unit test conditions reverse breakdown voltage v br 11 13 17 v i r = 1ma, pin1 to pin2 5.8 8 11 i r = 1ma, pin2 to pin1 reverse current (note 6) i r ? ? 25 na v r = 5v dynamic resistance, from pin 1 to pin 2 r dyn ? 0.19 ? ? i tlp = 1a to 20a, t p = 100ns dynamic resistance, from pin 2 to pin 1 r dyn ? 0.19 ? ? i tlp = 1a to 20a, t p = 100ns capacitance c t ? 26 30 pf v r = 0v, f = 1mhz clamping voltage, from pin 1 to pin 2 v cl ? 21 ? v 8kv contact discharge after 30ns iec61000-4-2 clamping voltage, from pin 2 to pin 1 v cl ? 12 ? v 8kv contact discharge after 30ns iec61000-4-2 notes: 5. device mounted on fr-4 pcb pad layout (2oz copper) as shown on diodes, inc. suggeste d pad layout ap02001, which can b e found on our website at http://www.diodes.com. 6. short duration pulse test used to minimize self-heating effect. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 25 50 75 100 125 0.0 0.1 150 1.1 t (c) j figure 1 normalized peak pulse power vs. initial junction temperature p ( t initial ) / = + 2 5 ) pk j p ( t initial c pk j 8/20s t (c) j figure 2 leakage current vs. junction temperature (typical values) i (na) r 1 10 100 25 50 75 100 125 150 v = v = 5v from pin 1 to pin 2 rrm
desdalc5lp document number: ds36761 rev. 2 - 2 3 of 6 www.diodes.com may 2014 ? diodes incorporated desdalc5lp advance information advanced information 1101001,000 1 10 100 1,000 10,000 t , pulse duration (s) p figure 3 peak pulse power vs. pulse duration p , p eak p u lse p o we r (w) pk pin 1 to pin 2 1 10 100 1,000 t , pulse duration (s) p figure 4 peak pulse power vs. pulse duration 1 10 100 1,000 10,000 p , p eak p u lse p o we r (w) pk pin 2 to pin 1 1 10 81318 v (v) figure 5 clamping voltage vs. peak pulse current (typical values) c 22 i (a) pp 8/20s t initial = 25c from pin 1 to pin 2 j v (v) figure 6 clamping voltage vs. peak pulse current (typical values) c i (a) pp 1 10 6 8 10 12 14 16 8/20s t initial = 25c from pin 2 to pin 1 j 10 12 14 16 18 20 22 24 26 28 30 v (v) figure 7 junction capacitance vs. reverse voltage (typical values) line c , j u n c t i o n c a p a c i t an c e ( p f ) t t = 25c f = 1mhz v = 0.1v pin 1 to pin 2 j osc 10 12 14 16 18 20 22 24 26 28 30 v (v) figure 8 junction capacitance vs. reverse voltage (typical values) line c , j u n c t i o n c a p a c i t an c e ( p f ) t t = 25c f = 1mhz v = 0.1v pin 2 to pin 1 j osc
desdalc5lp document number: ds36761 rev. 2 - 2 4 of 6 www.diodes.com may 2014 ? diodes incorporated desdalc5lp advance information advanced information figure 9 esd response to iec 6100-4-2 (+8kv contact discharge) figure 10 esd response to iec 6100-4-2 (-8kv contact discharge) figure 11 esd response to iec 6100-4-2 (+15kv contact discharge) figure 12 esd response to iec 6100-4-2 (-15kv contact discharge) (1) esd peak (2) clamp voltage @ 30ns (3) clamp voltage @ 60ns (4) clamp voltage @ 100ns (1) 72v (4) 16v (3) 19v (2) 21v 50ns/div 50v/div (1) -76v (4) -12v (3) -10v (2) -12v (1) esd peak (2) clamp voltage @ 30ns (3) clamp voltage @ 60ns (4) clamp voltage @ 100ns 50ns/div 50v/div (1) 125v (4) 19v (3) 19v (2) 22v (1) esd peak (2) clamp voltage @ 30ns (3) clamp voltage @ 60ns (4) clamp voltage @ 100ns 50ns/div 50v/div (1) esd peak (2) clamp voltage @ 30ns (3) clamp voltage @ 60ns (4) clamp voltage @ 100ns (1) -133v (4) -10v (3) -13v (2) -17v 50ns/div 50v/div f (hz) figure 13 s21 attenuation measurement result -40 -35 -30 -25 -20 -15 -10 -5 0 100k 1m 100m 1g db 10m 0 5 10 15 20 0 5 10 15 20 25 pin 2 to pin 1 pin 1 to pin 2 tlp plot pulse with 100ns i (a) pp v (v) cl figure 14 tlp measurement
desdalc5lp document number: ds36761 rev. 2 - 2 5 of 6 www.diodes.com may 2014 ? diodes incorporated desdalc5lp advance information advanced information package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com /datasheets/ap02001.pdf for latest version. x1-dfn1006-2 dim min max typ a 0.47 0.53 0.50 a1 0 0.05 0.03 b 0.45 0.55 0.50 d 0.95 1.075 1.00 e 0.55 0.675 0.60 e - - 0.40 l 0.20 0.30 0.25 r 0.05 0.15 0.10 all dimensions in mm dimensions value (in mm) z 1.1 g 0.3 x 0.7 y 0.4 c 0.7 l e b r e d a1 a z x c g y
desdalc5lp document number: ds36761 rev. 2 - 2 6 of 6 www.diodes.com may 2014 ? diodes incorporated desdalc5lp advance information advanced information important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when prope rly used in accordance with instructions for use provided in the labeling can be reasonably expected to re sult in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
